My AC is no longer cooling.
Before concluding there is a fault, a few simple checks, the ones manufacturers give, often solve the problem. If nothing changes, here are the signs that call for a technician.
Updated on 27 October 2026
1. The remote control: mode, set temperature and batteries
Choose cooling mode and check that the set temperature is suitable (Daikin). Some modes cool less, such as energy saving or dehumidifying (LG).
If the unit no longer responds to the remote control at all, replace the batteries. After changing them, check that the remote control's communication channel has not changed. On some models, the indoor unit beeps each time it receives a command: no beep means the command is not getting through (Atlantic).
2. The air: filters and clear airways
A clogged filter limits heat exchange, and the unit produces less cooling (Atlantic). Clean or replace the filters as the manual says: ADEME recommends doing so every six months for individual units.
Check that nothing blocks the air inlets and outlets, indoors and on the outdoor unit (Daikin): leaves, objects placed in front (ADEME). The outdoor unit must be able to release its heat (LG).
3. The room itself
- Doors and windows closed while the AC is running (Daikin, ADEME).
- Shutters closed before the sun hits the windows (ADEME).
- No extractor fan in the room running at the same time (Daikin).
An AC unit that is too small for the room struggles to reach the set temperature, and may never reach it if the gap is large (Atlantic). Our guide on air conditioning size explains how it is chosen.
4. A light is flashing or a code is displayed
Take a photo of the code on the remote control, or film the flashing lights on the indoor unit: the technician will use it for the diagnosis (Atlantic).
Atlantic then advises switching off the power at the unit's circuit breaker, waiting at least seven minutes, then switching it back on. If the fault comes back, do not restart the unit again and again: call a professional. The procedure can vary from one brand to another: your unit's manual prevails.
5. When to call a technician
If nothing changes after these checks, the cause cannot be reached without measuring tools: a sensor, the circuit board, a fan, the compressor, or a lack of refrigerant. We describe the faults we come across most often on our air conditioning repairs page.
If refrigerant is missing, it is leaking: a lack of refrigerant reduces efficiency, and the leak must be stopped quickly (Atlantic). We look for it, and we do not recharge a circuit that is leaking.
Never take the unit apart yourself: you could release all the refrigerant, a powerful greenhouse gas. For servicing and repairs, call a professional who holds a certificate to handle refrigerants (ADEME).
If the unit leaks, ices up or smells of burning, switch it off and wait for the technician.
We work in Nice, the Alpes-Maritimes, Monaco and the Var (on quotation), Monday to Saturday, 8 am to 6 pm: describe the fault.
Sources
- Daikin, « Le système de climatisation ne rafraîchit ou ne chauffe pas la pièce », online help (in French), accessed on 27 October 2026.
- LG, « Le vent du climatiseur n'est pas froid », online help (in French), accessed on 27 October 2026.
- Atlantic, « Pourquoi ma pompe à chaleur air/air réversible produit peu de froid ? », updated on 21 December 2023, accessed on 27 October 2026 (in French).
- Atlantic, « Mon unité intérieure Atlantic Fujitsu ne réagit plus avec ma télécommande infrarouge », updated on 28 June 2024, accessed on 27 October 2026 (in French).
- Atlantic, « Que faire en cas de code erreur ou clignotement d'un symbole sur la télécommande de ma climatisation Atlantic ? », updated on 25 October 2026, accessed on 27 October 2026 (in French).
- ADEME, « Comment garder son logement frais tout l'été ? », guide, September 2026, accessed on 27 October 2026 (in French).
